Advantages And Disadvantages Of Using Polystyrene Cutting Machine

- Jun 27, 2017-

Advantages and disadvantages of using Polystyrene Cutting Machine
Polystyrene Cutting Machine, including Polystyrene Cutting Machine, laser engraving machine, laser marking machine, laser welding machine, Polystyrene Cutting Machine how to use its advantages and disadvantages of what?
    First, the energy of the laser is concentrated in the form of light into a high-density beam, the beam is transmitted to the surface of the work, produce enough heat, so that the material melting, coupled with the beam coaxial high-pressure gas directly remove the molten metal, so as to achieve the purpose of cutting, This shows that the laser cutting machine with the machine tool has a fundamental difference.
    Polystyrene Cutting Machine uses the laser beam emitted from the laser generator, through the optical path system, focusing on high-power density of the laser beam irradiation conditions, the laser heat absorbed by the workpiece material, the workpiece temperature rose sharply to reach the boiling point, the material began to vaporize And the formation of holes, accompanied by high pressure air flow, with the beam and the relative position of the workpiece movement, and ultimately the material to form a slit. The cutting process parameters (cutting speed, laser power, gas pressure, etc.) and the trajectory are controlled by the numerical control system. The slag at the slit is blown by the auxiliary gas of a certain pressure.
 Use of fiber cutting machine Note:
1) double focal length laser cutting head is Polystyrene Cutting Machine on the vulnerable items, long-term use, resulting in laser cutting head damage.
2) every six months to check the Polystyrene Cutting Machine track straightness and the vertical machine, found that the normal maintenance and timely debugging. Did not do this, it is possible to cut out the effect is not how good, the error will increase, affecting the quality of cutting. This is the top priority, must be done.
3) once a week with a vacuum cleaner to remove the dust and dirt inside the machine, all electrical cabinet should be closed dust.
4) Always check Polystyrene Cutting Machine strip, sure to tighten. Or in the operation of a problem, there may be hurt people, serious can lead to death. Steel looks like a small thing, a problem is still a bit serious.
5) Polystyrene Cutting Machine rails should always clean up, remove dust and other debris, to ensure that the equipment should always wipe the regular rack, plus lubricating oil to ensure lubrication without debris. Rails to be regularly cleaned and on the oil, there is the motor should also be regularly cleaned and on the oil, the machine will be able to walk better, more accurate cutting, cutting out the quality of the product will be improved The