Maintenance and operation of Polystyrene Shape Molding Machine
Polystyrene Shape Molding Machine achievements in the development of the cold-bending industry in the machinery industry has played a significant role for this large-scale machinery is suitable for maintenance are critical, the following together to understand the polystyrene machine maintenance.
Polystyrene machine maintenance, also known as lubrication maintenance, we from the continuous lubrication and intermittent lubrication to introduce two aspects. If the Polystyrene Shape Molding Machine is a long-term state of operation, Polystyrene Shape Molding Machine maintenance for half a year for lubrication on the line, if long-term use, then 10-30 days to conduct a lubrication, so that the use of higher efficiency and extend its service life. Here to remind you that in the course of the use of any failure to use, please stop running immediately, check the maintenance, do not harm the staff.
Polystyrene Shape Molding Machine maintenance is critical, the user not only to operate in accordance with the correct operation process, but also to have professional maintenance knowledge.
Operation of Polystyrene Shape Molding Machine:
1, before the boot, first of all to check the machine whether there are debris, or there is no need to clean the machine near the machine will affect the normal production of the object;
2, to the Polystyrene Shape Molding Machine need to lubricate the components plus lubricants, such as gears, bearings, cutter and so on. If there is a punching equipment, punching equipment should be the guide column, as well as punching the various parts of the mold to add lubricants;
3, Polystyrene Shape Molding Machine production before the test. Home page to open the power switch, manually operate the various functions are normal;
4, began to feed production, after testing the normal function of the test, began to feed production, in the production process at any time attention to the entire production line may appear emergency situation. Production time, the machine can not stand;
5, in the discharge port picking, according to their own working speed adjustment Polystyrene Shape Molding Machine production speed;
6, Polystyrene Shape Molding Machine after the end of production, should turn off the power switch, completely cut off the machine power;
7, Polystyrene Shape Molding Machine to clean up and keep the body clean. As well as the waste produced in the production just to clean up;
8, close the box lock, so as to avoid other unrelated personnel to operate the machine, causing damage to the machine.