eps injection machine

- Oct 18, 2019-

THE MAIN FUNCTIONS OF THIS MACHINE

To accommodate with totally different sized product, this injection machine has wide ranges of mould plate, the min, dimension is around 600 × 800 millimeter and therefore the easy lay. Dimension is up to 1200 × 1400 millimeter. This machine is provided with ballroom dance mechanism, compressed feeding system, and central energy system, relief damper, holding-pressure cistern, condensation system, computer-controlled system, digital method system and vapor bath.


THE MACHINERY STRUCTURE

This system doesn't need any material. The hydraulic cylinder is put in within the 2 sides of the doom with even mould clamping force. The untainted dome will hold the warmth. The mold gap and mold closing are managed by the computerised system which might make sure the best feeding accuracy. The mould ejection motion is controlled by the ejection system to produce the most effective quality of exactitude product throughout the ejection method.


THE LAYOUT OF THIS MACHINE

This machine is meant as a three-dimension open area. This open-space style can fasten the mould ever-changing method and operators will amendment the mold from the front, back and 2 sides of this machine. Also, this machine are often placed directly on the bottom while not setting any platform. To secure the security of the operators, this machine is provided with safety door and security system.


MOLD SYSTEM

This mould is formed in three-piece plate format. additional energy are often reserved while not doom and thus, the mould plate are often extremely utilised. The leader pins and applicator are put in at intervals the mould moving plates to make sure the security of operation. to cut back the idol time, this method provides quicker mould installation and ever-changing system.


HYDRAULIC SYSTEM

Two-step mechanism provides 2 speeds (fast and slow) choices for mold-closing and mould- gap. Also, the interval is reduced.


CENTRAL ENERGY SYSTEM

This machine has one full set of central energy system that is created by our company All steam and air which are required throughout the injection method are controlled by the central energy system valve. this method can give even air intake and may be adjusted easier. This unaggressive steam system is meant with enlarged pipes and valves which might give best operating condition.


THE PRESSURE RELIEF DAMPER

The adjustment of energy pressure is incredibly necessary. beneath higher steam pressure, the assembly time are prolonged and consume additional energy. However, the ultimate product could be unshapely and therefore the surface look of the merchandise might be affected once the pressure is simply too low. The relief damper functions once emotional mould and heating up the mold. The compressed gas is employed for filling and this damper can cut back the consumption of energy and supply top quality product.


THE HOLDING-PRESSURE cistern

The machinery is provided with one set of holding pressure water coil that has 2 totally different entries for cooling water and condensation.


VACUUM SYSTEM

The vacuum system is provided with the Liquid Ring pump and condenser that provides additional economical vacuity. with none additional drying step, we will speed up the injection beneath this vacuum system. The mould ejection is straightforward to be completed and conjointly save the additional energy.


COMPUTER CONTROLLED SYSTEM

This injection machine is provided with computer- controlled system that has the functions of editor and enlargement. each step of operation is exactly beneath controlled by this ADP system error detection and indications are displayed on the screen each model is put in with this work out system that displays the procedures, time setting and priorities pressure management valve can set the pressure.